Skip to main content
11 votes

How to store my Kryptonite Kryptolock together with two large bottles in my frame?

Consider downgrading your security for out of city rides. Use a reasonable quality coiled cable lock for your stops. Small, light and silent. While most cable locks can be chopped in seconds with a ...
Warren Burton's user avatar
9 votes

How to store my Kryptonite Kryptolock together with two large bottles in my frame?

If there is a solution with the bracket you have, it's likely to be on the seat tube. It's a large bike with low cage mounts on the seat tube, so this will probably work, though it depends on how well ...
Nathan Knutson's user avatar
4 votes

What is the lightest chain lock that would present difficulty for bolt cutters?

Per se, the question is a product recommendation, that is off-topic here. So I won't answer it directly. Also, the question also contains some contradictory elements, as a good lock needs to be heavy, ...
Rеnаud's user avatar
  • 20.6k
3 votes

How to store my Kryptonite Kryptolock together with two large bottles in my frame?

I've almost found a reasonable setup by using the Transit Flexframe-U Bracket ability to rotate itself a bit like this: This setup: completely clears my legs keeps both bottles accessible ...
Ciro Santilli OurBigBook.com's user avatar
3 votes

How to store my Kryptonite Kryptolock together with two large bottles in my frame?

I would be inclined to go low-tech, and just use some velcro ties. It's a bit hard to judge because the lock is at an angle, but it looks like if the lock were raised to sit just below the top tube ...
DavidW's user avatar
  • 5,183
3 votes

How to store my Kryptonite Kryptolock together with two large bottles in my frame?

I recently had that bracket on the fork on my hybrid, where it worked well for about 8 years. Done sensibly, there's no risk whatsoever of it ending up in your spokes. Doing it up reasonable tight ...
Chris H's user avatar
  • 59.7k
2 votes

How to store my Kryptonite Kryptolock together with two large bottles in my frame?

Another option is to attach the mount to the seat tube with the lock positioned to the side of the bike, extending to the back. The majority of the lock will be along the rear triangle. Another option ...
toddg's user avatar
  • 399
2 votes
Accepted

How to adapt a tube-mounted clamped accessory for a larger diameter tube?

Your options boil down to BUY something, MAKE/ADAPT something, or find a WORKAROUND. Buying an item for this purpose is easiest, as long as you can identify a part that will do the job as required. ...
Criggie's user avatar
  • 125k
1 vote

Find replacement Electric bicycle battery lock / cylinder

That’s going to be a proprietary part made for XEED. Limited chance of buying one off the shelf. If XEED can’t provide a new module maybe you can get the lock core replaced which would be a job for a ...
Warren Burton's user avatar
1 vote

How do you lock up your bike trailer?

I found this for my future trailer purchase, it's 1/4 inch, so it should work for all trailers I've seen. from https://www.harborfreight.com/6-1-2-half-inch-rotating-coupler-lock-98978.html Also ...
james watson's user avatar
1 vote

What is the best bicycle lock on the market?

Testing in the Netherlands has proven that no lock on the market will stop experienced thieves, it will only slow them down by seconds to minutes. And those tests include motorbike locks as well as ...
Willeke's user avatar
  • 4,131

Only top scored, non community-wiki answers of a minimum length are eligible