Skip to main content
8 votes

Why can't the Schlumpf Mountain Drive be used along with the 14-speed Rohloff?

If you use the Rohloff Speedhub, then you should use the Schlumpf Speed Drive (not the Schlumpf Mountain Drive). According to the Manual-Schlumpf-Mountain-Drive.pdf Please note, that Rohloff only ...
Michael Altfield's user avatar
7 votes
Accepted

How to replace internal BB with external BB on belt drive bike?

You want to transplant the 104 BCD Gates ring you have on to a hypothetical external BB 104 crank and wind up with correct belt line a Gates sprocket on a Rohloff. A lot of the pertinent information ...
Nathan Knutson's user avatar
4 votes
Accepted

Is it normal that my rear bicycle wheel is 1/4 cm off to the left on the top of the seat stay and 1/2 cm off on the left of the chainstay?

Whenever you see something like this on a frame with sliding dropouts, the first inclination should be make sure the sliders are adjusted in line with each other. If there's any doubt, do it with ...
Nathan Knutson's user avatar
2 votes

GreenMachine by Flevobike (recumbent) - Clicking Noise When Pedaling

In this pdf download (parts names in Dutch) you find the bike 'exploded'. It was suggested that the chain tensioner or a chain guide are likely to be the problem. It is on page 12, says the person who ...
Willeke's user avatar
  • 4,621
2 votes

GreenMachine by Flevobike (recumbent) - Clicking Noise When Pedaling

Nice bent! I'm unfamiliar with the stickbike design internally - are you able to unship the rear chain, and try pedalling just the front chain? Of course you won't move, but if the clicking is ...
Criggie's user avatar
  • 127k

Only top scored, non community-wiki answers of a minimum length are eligible