Timeline for Cannot remove gears/cassette from axle (hub motor)
Current License: CC BY-SA 4.0
5 events
| when toggle format | what | by | license | comment | |
|---|---|---|---|---|---|
| Oct 5 at 7:50 | comment | added | Chris H | the one that's a possible is a cheap unbranded one from ebay that I've had for years, but I'll try to remember to check later. When I temporarily mislaid it I bought one that specifically won't fit over much because it goes directly onto my square drive tools. | |
| Oct 5 at 7:29 | comment | added | Noise | @ChrisH Often the bore is big to clear the various nuts and spacers on a standard axle but reduces at the end to the axle diameter (or about 12mm). Have a look at yours and see if you think it would clear a long 14mm axle, so a bore of 15mm at the hex-shaped end. Let me know what brand if it's a fit. | |
| Oct 4 at 15:36 | comment | added | Chris H | A bigger clear bore is an advantage of (at least some) tools that are designed to be used with a socket, though the ones that fit directly onto a 1/2" square drive are normally nicer to use. Of course with a cable you can't use the square drive anyway, and have to use an open spanner | |
| Oct 2 at 7:59 | history | edited | Noise | CC BY-SA 4.0 |
added 98 characters in body
|
| Oct 2 at 7:54 | history | answered | Noise | CC BY-SA 4.0 |