8

I recently put new tires on my bike, and in so doing, removed and replaced the wheels. It seems that now my chain has more slack in it than before, and if I pedal backwards while in the smaller cog in the main set of gears the chain rubs on the deraillieur. Is this normal? Why is my chain more slack now that it was before, if the wheels are the same? What shold I do to fix the problem?

Improve this question

3 Answers 3

Reset to default
5

Dérailleurs exist not only to change gears, but to add tension to the chain as well. If you are noticing chain slack, and nothing else has changed or been replaced, the reason for chain slack is that the dérailleur has lost this ability.

This could be for a few reasons:

  • The dérailleur has lost some of it's 'springy-ness'. This can happen over long periods of time, but also can be indicative of damage, but is less likely.
  • The dérailleur has shifted positions. Some dérailleurs bolt directly to the frame, but some do not, and instead are positioned in the dropout. If you have this type of dérailleur, and recently removed your wheels, it's possible that the dérailleur has 'slipped' in the dropout.
Improve this answer
1
  • Seems like this is exactly what happened, thanks. The derailleur shifted when I reset the wheel.
    – gabe.
    Commented Aug 29, 2010 at 0:59
1

It could be that the deraillieur has moved to the front. It could be that the entire unit has rotated around it's attachment point, or that it has other adjusts screws you accidently touched. Have a good look as to how it sits now before you start twiddling.

Improve this answer
1

The small jockey wheels on the derailleur can also seize up preventing it from functioning properly, you should if you're lucky be able to remove them and regrease them if needed.

Improve this answer

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service and acknowledge you have read our privacy policy.

Not the answer you're looking for? Browse other questions tagged or ask your own question.