I'm trying to find new wheels for my trek 1.1, and I can't find the spacing for the hubs. The wheels I'm looking at have a front spacing of 100mm, and a back spacing of 130mm. Will these fit on my bike?
1 Answer
Road front hubs are 100 mm and 8-10 speed rear hubs are 130 mm.
In the case of the Trek 1.1, it's always been spec'd with a 8 speed rear hub, so those wheels should fit on the bike.
-
In any case, it's probably a good idea to just measure. The valid options are in 5 mm increments, so even a basic measuring tape or ruler will suffice. It's not like it's a seatpost where you need a micrometer to figure out what width they ended up using.– KibbeeSep 10, 2015 at 20:26
-
-
You're right, I should have typed 4mm rather than 5mm. Looking at the standard spacings it seems that all the spacings used are 4 or 5 mm apart at minimum. Still, a ruler should suffice for any measurements of the hub.– KibbeeSep 10, 2015 at 20:33