Questions tagged [rack]
Use for racks that are installed on your bike. For the sort of rack that you park your bike in, please use the PARKING tag.
153 questions
4
votes
5
answers
713
views
DIY Rack/Mount In Trailer
I have a 4x8 utility trailer with 3/4" plywood floor and "barn fencing" (for lack of a better term) around all 4 sides. The floor is solidly bolted to the frame but the fencing around ...
6
votes
2
answers
979
views
Will a rack-mounted child seat be safe if the rack's maximum load is 2kg less than the seat manufacturer describes as the minimum load?
The question might sound confusing (my apologies), but here are the specifics.
I have a bike that's fitted with a Racktime rack, which has a maximum load of 25kg.
I also recently got a child seat that'...
3
votes
1
answer
226
views
Not enough gap between the rear fender and rack eyelets
I have been running Tubus racks on my Strael 3.0 bike. Recently I bought fenders for the bike but when trying to install I find there isn't enough space for the screw to go into the fender eyelet if I ...
5
votes
1
answer
214
views
rear rack > frame compatibility (child seat)
I have a Topeak BabySeat II MTX 2.0 Rear Rack that is supposed to mount into threaded holes in the frame. However, my old road bike does not have these holes, and instead has eyelets welded to the ...
1
vote
2
answers
182
views
What would be the best steel to pick for bolts fastening a luggage carrier (rack)?
I'm installing a rack for a new project.
The rack model I'm picking is rated for a load of 18 kg, and there are even models rated up to 27 kg!
Though, racks are usually fastened to the bike using just ...
3
votes
1
answer
359
views
How to install bike rack to frame with braze-ons that are different sizes?
I have the Topeak MTX 2.0 bike rack, and hoping to install on a KHS Flite 223 road bike.
The M5 screws that come with the rack screw in as expected to the braze-ons near the rear brake caliper.
But ...
2
votes
1
answer
882
views
Attaching rear fenders to a bike without eyelets
I'm currently commuting by bike and wanted to put a pair of permanent fenders to prepare for the coming winter weather. I ride a Jamis Allegro A2 with a rear luggage rack. I have a photo below of what ...
5
votes
3
answers
2k
views
What is a safe weight for front rack + luggage for a steel race bike fork?
I frequently commute with a backpack on my '90s steel race bike, and encounter the usual issues of sweaty back and tired shoulders. The riding position is also not perfect for carrying a backpack on ...
2
votes
1
answer
193
views
What paniers' rack for my bike?
I own a Specialized Diverge E5 gravel bike and want to mount a rack on it.
The bike unfortunately only has mounting points on the rear dropout, not on the seatstays unlike many other bikes. Apparently ...
6
votes
2
answers
865
views
Can I mount a rack on eyelets that aren't horizontal?
The eyelets at the lower end of my frame's seatstays are not aligned with the dropouts (to allow attachment of a vertical rack strut). The misalignment is around 13°.
Two questions:
What options do I ...
4
votes
1
answer
374
views
Standard distance/height of mid-eyelet on fork?
Is there any standard (regarding height/distance) for middle eyelet on fork? Take a look at this example (taken from https://www.cyclingabout.com/all-about-front-racks-bicycle-touring/):
Obviously if ...
1
vote
1
answer
63
views
How do I mount a light intended for a tube to a flat rack?
I have a rack like this:
This works really well for me, for the most part.
Alas, I am mounting my taillight like this:
So, in the past, I've had some PVC pipe affixed to the side of the thing. Now, ...
2
votes
2
answers
705
views
storage pulley rack for a diagonal ceiling
i want a system based on a ceiling pulley for a quite heavy bike, the storage room is under the roof, so the ceiling (cement concrete material) is not flat.
Do the ceiling racks work well?
What about ...
3
votes
2
answers
771
views
Is there a straightforward way to widen a rear rack
I am trying to widen a 15cm wide rear rack to better support a rear bag. The current rack is part of the battery holder and so cannot be simply swapped for a wider rack.
2
votes
2
answers
132
views
Is it feasible to jerryrig a motorbike saddlebag as a bike pannier?
There’s a used rear bike rack and a used motorbike saddle bag people are selling in my area. I already set up a time and date to pick both up before I realized that this bag was for motorbikes, but I ...
7
votes
3
answers
788
views
How would one determine if enlarging the loadbearing screw holes for the bike rack is a good idea?
I've had multiple times the issue of the loadbearing screw for the bike rack breaking in half, and it's always a hell to get out.
There seem to be two schools of thought:
Drill a bigger hole and put ...
0
votes
1
answer
79
views
Boot rack capacity with mountain bike
I recently purchased a Spectral 29 AL6 which, with pedals, will be around the 16kg mark (or just under).
I currently drive a Holden Astra TS (here's what it looks like), which doesn't have a tow bar ...
9
votes
3
answers
1k
views
How can I get a long rear rack with flat deck?
Is there a rear rack that has a long platform (over 16in/40cm) where there's a flat space to set things on top (as opposed to just tubes)? With a two-leg kickstand to position the bike relatively ...
9
votes
2
answers
1k
views
Will a rack fit on these rear-facing eyelets?
I have a gravel bike, a Nukeproof Digger, and I'd like to fit a lightweight pannier rack to it. It comes with 2 rear facing eyelets on the seatstays.
Pannier racks seem to mount using eyelets on the ...
3
votes
2
answers
1k
views
Rear pannier rack legs seem to narrow in width - is my rack damaged?
I bought a pannier rack but it seems way too narrow to fit on my MTB bike (in terms of the axle width), I can sort of push apart the two legs (of the rack) but even then the spacing is only 10CM (when ...
2
votes
4
answers
1k
views
Can I attach a rear cargo rack directly to the seat clamp?
I'd like to install a rear cargo rack on a bike that doesn't have eyelets for the top attachment. Would it be a bad idea to attach the rear rack stays to this seat clamp that's welded onto the frame, ...
2
votes
5
answers
2k
views
Back rack good for commute?
Doing commute and thinking about buying a back rack for my bike to put my backpack on. Since the bag causes me to sweat. Do people who have back racks on their bike find it useful for this purpose?
2
votes
3
answers
997
views
Topeak rack - rear light bracket is annoying [closed]
My wife has a Topeak Explorer rack.It has an bracket on the rear for a light or reflector. It is useless to mount any of the rear lights we own and is ugly. Anyone find any use for it or cut it off? I ...
1
vote
0
answers
229
views
What is the brand of this rear rack?
I have a bike which was bought in Germany in 1995. It has a super nice steel rear rack which, after 25 years, has no wear marks besides some scratches in the paint. Does anyone know which brand this ...
3
votes
2
answers
1k
views
Can I install a disc-brake pannier rack on a bike with V-brakes?
I have a MTB with V-brakes. 14-15 years old. I want to get a pannier rack. Will a rack suitable for a bike with disc brakes (eg Topeak Super Tourist DX) fit a bike without disc brakes? I’m not sure if ...
2
votes
3
answers
676
views
Rear dynamo light (tail light) or reflector without rack?
I have a light / reflector designed to mount to a rear rack. It has two horizontal holes for bolts, like this:
I do not have a rack.
But I do have rack mounts like these on the seat stays:
Is there ...
12
votes
2
answers
2k
views
Why is my rear rack shaped like this?
I recently bought a used bike that had a rack attached to it. Until last night I didn't notice this strangely shaped part on one of the sides of the rack (circled in purple in the picture). This isn't ...
3
votes
1
answer
418
views
Seatpost mounted luggage rack on carbon frame
Planning on taking my carbon Ribble to Wales to go play in the valleys. Need to carry limited luggage from point to point. Looking at a seatpost mounted rack like the Topeak RX beam, but wanted ...
7
votes
6
answers
3k
views
Buying rear rack during pandemic crisis - go real bottom, up high, or wait?
As you may know from my other question, I'm putting together a bike to commute. I'm big, heavy, and roads will be paved only first half of the way.
I will need to buy a rear rack for my bike. Thanks ...
0
votes
0
answers
59
views
Can i put a rack for panniers on a Carbon road bike w/ Thru axle? [duplicate]
I was looking at getting a new Trek Domane SL 5 for commuting, but i don't see any way to mount a rack on it? I need to carry a laptop bag and a change of cloths. Is there any way to do this on that ...
0
votes
1
answer
1k
views
Thu axle mount for bike lugage rack
I would like to mount a luggage rack on a bike that has no mounting holes and a thru axle.
Is there an adapter that I can use to replace the thru axle with something that provides attachment points?
...
2
votes
1
answer
146
views
What type of brake is this? Adjustment questions
Is it a side pull brake? I am trying to match this brake to the Park Tools videos on YouTube. This brake seems closest to a side pull brake in this video, but that video mentions a double nut at the ...
3
votes
2
answers
1k
views
How would you recommend securing a pannier rack on a bike without braze-ons?
My bike has lugs for mudguards/rack down by the rear drop-outs, but not in the usual places at the top of the seat-stays.
My two options seem to be:
use P-clips around the seat-stays
fashion a ...
4
votes
3
answers
6k
views
Safe to mount rear rack for Grail 7.0 al 2020 ( no eyelets )?
The 2020 model of Canyon al 7.0 gravel bike does not come with eyelets:
https://www.canyon.com/en-sk/road-bikes/gravel-bikes/grail/grail-al-7.0/2370.html
But for longer tours ( for what I would like ...
4
votes
3
answers
1k
views
Giant rack adapters
I'm looking for replacement inserts to mount a Panner Rack.
I'm not sure what the name or part no. is, but I've attached a photo of the parts on the left hand side of the frame. I've lost the pair on ...
0
votes
1
answer
562
views
Wobbling Topeak QuickTrack rack bag
I have a Topeak Super Tourist DX rack and an MTX TrunkBag DX bag, which fit together using Topeak's QuickTrack system - a dovetailed plastic foot on the bag slides into a metal channel on the rack.
...
4
votes
1
answer
2k
views
Tern Spartan (front rack) on Bike Friday NWT
Does anyone have experience with putting a Tern Spartan™ low-riding front rack on a Bike Friday New World Tourist? Will it fit?
Tern Spartan front rack:
Bike Friday NWT
Bike Friday standard front ...
8
votes
4
answers
5k
views
Why don't couriers use rear racks?
I've noticed that lots of courier companies prefer their riders to use messenger bags or backpacks. When a rack does get used its often a porteur rack of the front wheel? Does anyone know why these ...
1
vote
0
answers
80
views
Blackburn Central bike Rack [closed]
I'm trying to mount a blackburn central rear bike rack on my Kona Dew bike. I'm on step two of the four step instructions and cannot seem to fit the extender rod through the cam lock when the cam lock ...
1
vote
2
answers
1k
views
How to add rear rack to a full suspension bike?
I'd like to carry 20 - 40 pounds or so in panniers on my rear rack.
I've carried that much on my hard tail so it's not a problem for the biking itself.
The cantilevered rack style that is supported ...
0
votes
1
answer
3k
views
Front rack for front suspension bike?
What are some good options for a sturdy front bike rack (for carrying 30 to 40 pounds) on a front suspension bike?
3
votes
3
answers
1k
views
Folding basket - is there such a thing?
I'd like to be able to go to a grocery (or some other) store on my commute from work. I've got a rear rack (b-tween).
I know, that I can permanently mount a basket on it, but I'd prefer not to since ...
5
votes
10
answers
7k
views
Can I install a back bike rack without attachment to the rear part of the frame?
Can I install a back bike rack without attachment to the rear part of the frame?
Also, if someone can clarify, whenever I google
bike rack
I get hits on racks designed to carry bikes on a car ...
3
votes
1
answer
525
views
The best way to mount a rear rack
I've bought Bontrager Backrack light and I am thinking about different ways to mount it on my road bike.
Some details:
at the bottom the rack attaches to the quick release screw.
the tubes ...
2
votes
2
answers
1k
views
Soundsystem for bicycle
Before starting to build a soundsystem for my bicycle I would like to ask where I can be redirected or provided info for a) a ready-made solution, b) a set of clear instructions on how to make one.
...
5
votes
1
answer
2k
views
What’s a good way to carry a kid’s bike on an otherwise full bakfiets?
I have a Workcycles KR8 bakfiets and the 3yo just got his first pedal bike.
We wanted to take him and his bike for a fifteen minute ride to the park where he could ride by himself, but chucking his ...
2
votes
4
answers
5k
views
What is a good way to mount / secure a regular backpack, while commuting? [duplicate]
This is a purely commuting issue.
I have an around 3km route to the office, and a regular backpack (laptop, accessories, notebooks, ...) which is not a problem to carry around during autumn and ...
1
vote
1
answer
92
views
Rack bags options
I've attached a rack to my bike, this one:
Now my question is: what are my options for bags or something I can attach to it?
I'm not asking about a product rec, just for a list of options with pros ...
2
votes
1
answer
134
views
Cargo Rack Suggestions?
I recently bought a bicycle, and have found the need to purchase a cargo rack to go on the back of it.
After scouring Amazon looking for a reasonable one, I’ve discovered that, while there are many “...
0
votes
1
answer
312
views
Can I install a rack if I install plugin mudguards?
I bought a Cube Cross Pro https://www.cube.eu/2019/bikes/trekking/tour/cross/cube-cross-pro-bluenorange-2019/
I want to install a rack and mudguards. I found these nice plugin mudguards https://www....