Questions tagged [1x11]
The 1x11 tag has no usage guidance.
19
questions
4
votes
1
answer
117
views
Gravel derailleur advice
I have a gravel bike with the following 1X set up:
FSA Omega Megaexo crank, 40T
Sunrace 11-46 CSMS8 cassette
Sram Apex1 11 spd derailleur
Sram Apex 11 speed Double-Tap shifter
I would like to change ...
1
vote
1
answer
105
views
Adding a second chainring to a 1X
I have a 1X gravel bike with an 11-46 cassette and a 40T chainring. This gearing works for most of my riding but there are times when I'm doing some serious climbing that it would great to have one or ...
1
vote
1
answer
89
views
Chain pops up while backpedaling in highest gear
Backpedaling on highest gear (11t) causes chain to pop up/out off at the front top part of the smallest cog. The bike and all components are very new and stock. This is a 1-by Shimano GRX Drivetrain. ...
3
votes
2
answers
218
views
Shimano Deore 11s derailleur and shifter with a 9s casette 11-46t (Sunrace)
I was questioning if can I fit an 11s Deore derailleur with shifters to a 9s 11-46t Sunrace cassette?
I've got the doubt because I need to change my derailleur to one that can tolerate up to 46t ...
4
votes
3
answers
622
views
Can you use a shimano Tourney Rear derailer with a 1 x 11 (11- 52 ish) sprocket?
I'm trying to upgrade, but the Shimano Deore is too expensive... The problem with the other brands is that their rear derailleurs does not have good tension... so can I use a Shimano Tourney in a 1 x ...
0
votes
1
answer
42
views
Can I use an apex 1 crankset with a shimano mtb casette?
I'm building a mullet 1x11 gravel bike with ultegra shifters, slx rear derailleur and 11 speed 11-46t cassette and am now looking for a oneby crankset. The bike will be used in pretty flat terrain ...
1
vote
1
answer
110
views
1X11 build - align / slip / set up
Looking for advice on my 1X11 set up on a bike I’m (trying to) build:
The chain slips off single front chainring, on the inside, when I move into biggest rear cogs (gear 1 or 2). When I align the ...
1
vote
1
answer
91
views
Has anyone set up an 11sp ZTTO 11-52 cassette with an 11sp XT SGS and 11sp XT shifter?
I had 1x10 setup with a 10sp XTR shifter, 10sp Sunrace cassette (11-46) and an 11sp XT SGS derailleur and it worked very well (with the limit screw on the mech adjusted). The crank is a 32t RaceFace
...
4
votes
1
answer
682
views
Shimano RD M5120 and 10 / 11 speed compatibility
I thought the shimano mtb 10 speed is completely separate system and isnt compatible with anything else.
However now there is a 10/11 speed RD - the RD-M5120 SGS. I was wondering how does this work. ...
0
votes
2
answers
131
views
Will a 11-speed cassette fit my Giant SRC 3 frame (~2007)
I would like to upgrade an older Giant SRC 3 (~2007). Having a very limited experience with bike mechanics, how will i find out whether a 11-speed cassette will fit the frame and or the wheels?
2
votes
2
answers
817
views
Replacing 1x SRAM chainset with a Shimano chainset
I've just got a Genesis Datum 2019 bike on clearance.
The spec wasn't exactly what I would want—for a start it has SRAM rather than the Shimano we have on other bikes in our household—but more ...
1
vote
2
answers
602
views
XT 11 speed derailleur (RD-M8000-GS) rubbing 46T cog with b-screw all the way in?
I've broken my rear derailleur so I've decided to upgrade from my 2x10 to a 1x setup. For that, I've initially bought:
Deore XT 11 speed derailleur RD-M8000-GS (I've read it can work with 10s, but ...
0
votes
1
answer
272
views
SRAM Rival 1x: Hestitant shifting in middle of cassette when going to larger cogs - causes?
I have a few months old bike with SRAM Rival 1x. I have changed the cassette (to get closer gear spacing) and chain and can get the rear derailleur to shift almost perfectly swift and accurate both ...
7
votes
1
answer
1k
views
Derailleur can't shift to 51-T sprocket. Deore CS-M5100 + RD-M5100
ISSUE:
When attempting to shift to the largest cassette sprocket, the side of the derailleur cage contacts the 51t sprocket, so the chain is not able to go up the gear.
WHAT I DID:
My drivetrain was ...
9
votes
2
answers
4k
views
Shimano 11 speed MTB cassette on an 11 speed road hub, which spacer should I use?
I have a Shimano 11 speed mountain bike cassette and a Shimano 11 speed road hub. Without a spacer there is considerable wobble of the cassette, and I read that a spacer is required.
My wheels came ...
2
votes
1
answer
351
views
Upper pulley too far from cassette
I'm doing a 1x conversion with a Shimano SLX (M7000) groupset on an old road frame.
I just installed the rear derailleur and the pulley is too far away from the cassette. 18mm from the max cog (...
1
vote
1
answer
1k
views
1x GRX chain sizing with 42T cassette
I'm trying to convert a bike to a Shimano GRX 1x setup using the following components: RD-RX812, CS-M8000 (11-42T), CN-HG701-11 (and FC-RX810-1, 42T). The problem I'm stuck at is when shifted to the ...
0
votes
1
answer
237
views
Extending range on SRAM PG-1130 cassette / cassette specification
I'm considering buying a Kona Rove ST bike with a 1x drivetrain setup. However, one concern I have is a limited range of higher gears (40:11 ratio for the highest gear). I would like to have some more ...
1
vote
2
answers
2k
views
Going from 2x8-speed to 1x11-speed
I bought a beginner bike with a 2x 8-speed Shimano setup a year ago. I am looking to upgrade, now that I am getting more in to cycling then expected. Since I live in a really flat area (when I go on 3-...