Questions tagged [pump]
Bicycle pumps pump air into tires and suspension forks.
136 questions
3
votes
0
answers
77
views
Is there any way to adjust a "flatlining" pressure gauge on a pump?
At some point my cheapo Bontraeger floor bicycle pump was left outside, I would guess further that my kids submerged it and pumped it up and down for the LOLS. The pump seems to make ok pressure but ...
- 417
6
votes
2
answers
515
views
What is the name of the floor pump part that depresses the valve stem?
What is the name of the part in the floor pump chuck that depresses the valve stem?
Is it standard enough that I could buy a replacement?
I mainly use this pump to inflate presta tires. From what I ...
- 273
7
votes
3
answers
350
views
On-bike pump maintenance requirements?
I have a variety of small bike pumps, both mini-pumps like a Topeak Race Rocket and small floor-pumps like the Topeak Road Morph. They live on their bike all the time, and suffer the same vibrations ...
- 131k
3
votes
1
answer
106
views
Replacing slow to switch Presta/Schrader pump head with dual pump head on a floor pump. Can I go between brands?
I have a Giyo Air Supply floor pump which has one of those Presta/Schrader switchable heads where you have to unscrew the cap, wiggle out the head's innards for half an hour, turn them around then ...
- 483
3
votes
4
answers
1k
views
Is it a good idea to use a Presta-to-Schrader adapter and Schrader mini pump if you have bikes with both valve types?
I have bikes with two types of valves: Presta and Schrader. Usually when buying bikes or rims, I'm very careful to buy only Presta stuff. If I for some reason end up with a Schrader rim, I may go even ...
- 21.3k
5
votes
2
answers
981
views
Pumps keep breaking
I've now had two floor pumps 'break' in use, a Beto and a Vandorm, the latter on the first use. Both are dual Presta-Schrader. Both 'broke' while attempting to inflate a Vavert 700X28/35C Presta inner ...
- 173
5
votes
1
answer
156
views
EVO Hurricane Bicycle Pumps - how to remove the plunger?
Most bicycle pumps have screws or twist off the top to remove the plunger, but these Evo Hurricane pumps have a very odd collar with no embedded screws unlike others (see below).
Anybody know the ...
- 111
1
vote
1
answer
285
views
Is my mini pump broken?
I have a mini pump for my bike - I guess for around 3 years now. It's started to give me trouble recently - it's for a presta valve and it screws on, rather than locks on. For some reason when I ...
- 11
9
votes
6
answers
2k
views
Roadside repair: how to use a screw-on Presta pump on a tube with a removable valve core
I found the question How to keep Presta valve insert from detaching after inflation? but none of the answers are helpful because this happened to me in the middle of a ride on a rental bike. All I ...
- 5,631
1
vote
1
answer
919
views
Floor pump pressure gauge shows zero with Dunlop valve, should it be so?
I have a floor pump with the pressure gauge. When I attach it to the the tube having Schrader valve, the gauge shows the pressure. But when I attach it to Dunlop valve, it shows zero at still stand.
...
- 8,134
6
votes
2
answers
3k
views
How to prevent a Presta valve core from unscrewing when disconnecting a pump [duplicate]
My mini-pump has a screw-on head (as I guess most of them do) and several times when removing the pump from the valve, it's taken the valve core out with it.
The last time this happened to me on the ...
- 4,043
2
votes
1
answer
734
views
Dunlop valve core comes off with the cap
Could someone please enlighten me if my valve is broken? I think this is a Dunlop valve but the core seems completely stuck to the cap. No matter how much I twist and turn the core always comes off ...
- 21
6
votes
3
answers
2k
views
What is the difference between hand pumps for road bikes and mountain bikes?
I realise that hand pumps seem to be road or MTB specific, but what is the difference between these pumps?
I am looking for one to pump up my road and my mountain bike.
- 611
3
votes
2
answers
352
views
Is it risky to often use an air compressor because of potential for valve damage?
I always use a bicycle shop's air pump about once a week because it is free and convenient however about a month ago when filling in I found that valve was leaking. I went in got it fixed- quick cheap ...
- 517
4
votes
1
answer
576
views
Repairing Meidai Top pump?
I've got a very old MeiDai Top floor pump, like this picture ...
It suddenly stopped working, no resistance whatsoever from the plunger. I'd like to repair it.
So far, I bought this "741" ...
- 201
7
votes
5
answers
2k
views
Considering modern bicycle trends (2021), why are presta valves still the dominant design?
The usual trope justifying the use of Presta valves over Schrader valves is no longer logical (in my opinion at least) because of changes in wheel, rim, and tire systems. Let me exemplify by refuting ...
- 17.4k
4
votes
4
answers
1k
views
"Soft" valve insert for easier pumping
I've just bought my first bike in 20 years - a 29" mountain bike. And, inevitably, I've just got my first puncture in 20 years, and a lot has changed. The first thing I noticed is that today's ...
- 41
7
votes
1
answer
654
views
How do I take apart a modern Silca Impero frame pump?
I have a new frame pump and I want to take it apart. All the way - down to the metal tubes. This is the top of the air chamber and I don't know how to proceed. There is no trim piece covering this and ...
- 123
31
votes
6
answers
9k
views
Why do we need air-filled tires?
Why do we need air in bike tires?
Having changed hundreds of annoying flats, carried a change kit for thousands of miles, and pumped up tires before pretty much every ride, I got to wondering: why do ...
- 441
4
votes
2
answers
923
views
Tires not holding air at high pressure
I ride a Trek road bike with 25c tires. The recommended pressure on the tire is 100-130 psi. Before I ride I inflate the tires to close to the max pressure no problem and my pump works fine. But ...
- 141
0
votes
0
answers
84
views
Help identify mystery part?
This piece came with a CCM tire pump and I have no idea what it is or what it’s for. Can anyone tell me? Thanks.
- 11
3
votes
1
answer
2k
views
How often should air spring forks be reinflated (topped up)?
Forks that use an air spring, as opposed to a coil spring, have to be pumped up to the desired pressure to work as intended (using a shock pump). From experience, I know that they lose pressure over ...
- 746
0
votes
2
answers
8k
views
How to stop air leak when disconnecting inflator from Schrader valve?
People say that the pin must be pressed down in order for the air to get in. But when I try to remove the pump head by unlocking the lever, too much air leaks before I get to remove the pump.
- 13
2
votes
2
answers
2k
views
What maintenance should be done on a bike pump to keep it in good condition?
My zefal hp x 4 full frame bike pump internals have rusted out. I now have a Lezyne mini pump. What maintenance should I do on the pump to make sure it does not rust out?
- 607
0
votes
1
answer
140
views
What is the best way to attach a Presta Valve?
I attached a public bike station's Presta valve today - lost all the air in my tyre in the process and it got completely deflated.
- 101
2
votes
0
answers
382
views
What bike Pump can I use for the Peugeot Savoie?
I'm trying to find a hand pump that will fit the top tube of the frame, In the model manual attached is the Bike pump that says 'Zefal Competition HP pump' however could i use a standard 'Frame Pump' ...
- 33
3
votes
2
answers
11k
views
Why does bicycle floor pump not show pressure reading?
I bought a new floor pump and it pumps everything perfectly fine, the problem I have is that it only shows a pressure reading while I am pumping and the moment I stop, the gauge drops back down to ...
- 31
8
votes
3
answers
2k
views
Will this electric air pump suit my tires and work for me?
I have to buy air pump for bicycle, I saw this one online on Walmart.
My bicycle tires have a pressure range between 30 and 50 psi. Will this pump work, or should I buy mechanical one?
What are it's ...
- 385
0
votes
2
answers
1k
views
Why does front wheel keep more air pressure then rear wheel over time? [duplicate]
After pumping both the tires equally, after a few weeks pass, the rear tire of my bicycle keeps on getting flatter day by day, and looses pressure.
I have checked everything and there is no leakage ...
- 385
4
votes
2
answers
1k
views
Bike tires only inflate up to 30psi with foot pump
My bike has sat over the winter, and the tires went flat. I used my foot pump to inflate the tires (front and back) and both tires inflated to 30 psi. I have shraeder valves. The pump continued to ...
- 41
1
vote
0
answers
2k
views
Can't push down bike pump
I have Bell air glide 950 pump. I can't push down as the air is being blocked somewhere. I removed the tube/pipe that connects to the Schrader/Pestra valves. If I open the screw behind the pump, air ...
- 11
0
votes
2
answers
12k
views
Can't inflate my bike tires
Received an old bike from a family member and I've tried to inflate the tires but whenever I attach the pump to the tire it seems that I can't inflate it. All I hear is a hissing and it feels like all ...
- 1
2
votes
1
answer
91
views
Can pumps fail due to age?
I have a small cache of the now-discontinued Quickex Quicker Pro mini pumps. They have 105 cm3 stroke volume, and 5 kgf force required for 7 bar pressure. In about 100 strokes, I reach 7 bar on 28mm ...
- 21.3k
2
votes
1
answer
163
views
Not able to inflate my bike tyre
I have a Norco Mountaineer SL. It has a schrader valve and I am trying to inflate the tyres using https://www.amazon.ca/Crank-Brothers-16304-Sapphire-Silver/dp/B07K4PLWKW/
I seem to have set it up ...
- 121
6
votes
6
answers
43k
views
The pump needle broke off, leaving the base in the nozzle. How to remove the stuck base?
I was using this bicycle pump to inflate a ball. I inserted a needle pin to the nozzle, but the needle broke off after trying to insert it into the ball. The base of the needle pin is now stuck in the ...
- 111
1
vote
1
answer
529
views
How do I inflate this bicycle tire valve? [duplicate]
I inherited this bike with this funny looking stem. Is this broken? How do I inflate it?
- 111
4
votes
2
answers
2k
views
What is the typical structure and location of a check valve in a floor pump?
I decided to take apart a Bontrager reCharger floor pump recently on a whim, one of those whims during which you pay no attention at all to what you're doing. After putting it back together, the pump ...
- 141
2
votes
3
answers
2k
views
Usefulness of high-pressure/high-volume switch on a track pump
Among the track pumps (floor pumps) on the market, I see one advertised with the following feature:
foot-activated high-pressure/high-volume switch
I'm interpreting this to mean that the pump has ...
- 10.4k
6
votes
5
answers
17k
views
How to keep Presta valve core from detaching after inflation?
I have Presta valves on my bike tires and for the rear tire, each time I inflate the valve, upon detachment, the core screws off with the pump attachment and the tire deflates. I tried about 6 times, ...
- 247
0
votes
0
answers
320
views
Spin doctor Essentials II pump not working properly
I attach the pump head to the presta valve. It attaches properly and even a few PSI, like about 10 psi, go in and then the pump handle just wants to spring up and is very difficult to push down. I can ...
2
votes
1
answer
366
views
What is this valve and how do I fill it?
This is the valve in one of the tubes on my bike:
What kind of valve is this, and how do I fill it?
I originally thought it was a Presta valve, but it doesn't look or work like any of the presta ...
- 137
11
votes
1
answer
2k
views
Using a schrader pump on a presta valve
I have a JoeBlow Sport (not a Sport II or Sport III)
It head defaults to schrader style. There was an adaptor in the box which I thought was a presta adaptor.
I tried sticking that adaptor in the ...
- 390
1
vote
1
answer
113
views
Pump defective?
When I started pumping a new Pumpico floor pump, the shaft slid down doing nothing for about 12 pumps and then kicked in for 2 hard pumps before it did nothing again for another 10 pumps. It's a ...
- 11
2
votes
1
answer
1k
views
Fill my Fox Shock with Air
When I go over a sidewalk, the marker ring on my shock goes all the way down the shock, so I think I need air.
I bought a Giant "shock pump" that supposedly goes up to 400 psi.
I screwed it onto my ...
- 261
1
vote
2
answers
309
views
Bike pump issues
I got a Diamondback Viper for Christmas. The tires got a bit deflated so I got a $5 bike pump and I attempted to pump up the tires. All went well for a couple of seconds then all the air from the tube ...
- 19
0
votes
1
answer
97
views
Comparing mini pumps - what to look for and what to consider? [closed]
I plan to buy a mini pump to take on road rides. My bike has 700 x 25c tires.
There are many different models from each, some with thumb lock levers and some with a hose and screw-in lock.
What ...
- 69
1
vote
2
answers
337
views
I can't inflate tire. Should I look for another pump?
Hello to everyone in the community. I used to own a mountain bike which used 26" tires and I was able to inflate them after changing the tube while on the road. It wasn't perfect but allowed me to ...
- 113
1
vote
1
answer
199
views
Bicycle pump slips after using gear oil
My pump got little rusty from rain. So i tried gear oil on it. But now its not pumping, just sliping all the way down. Is it because of oil or the valve is damaged? I tried removing the oil with ...
- 11
2
votes
2
answers
4k
views
How would I go about getting this Zefal pump to work with a Schrader valve?
I have a seemingly well-functioning Zefal pump that I'm unable to identify that has a head on that I'm also unable to identify (maybe it's just Presta?).
All my family's bikes use Schrader valves.
...
- 123
6
votes
3
answers
3k
views
Pump head suitable for for small tires
What is the best pump for small bike tires with narrow spokes?
The pump head we have is large and is hard to place over the valve on our 20 inch tire.
I've tried pump extenders but they are screw ...
- 813